lbx CODB150, User Manual

Page: 7 / 24

7
9. Maintenance and cleaning
• Proper maintenance allows the equipment to function properly and extend its useful life.
• Do not spray cleaning products directly on the instrument.
• Turn off the main power during cleaning.

Do not use the following cleaning agents:
Colorants Isopropyl alcohol
Building materials Water containing surfactants / isopropyl alcohol
Cosmetics products Water containing surfactants / isopropyl alcohol
Food products Water containing surfactants
Fuels Water containing surfactants
• Before using another cleaning or decontamination method, the user should check with the
manufacturer that this method does not damage the instrument.
• Wear suitable protective gloves while cleaning the equipment.
• The equipment must be cleaned and disinfected before being sent for repair. Always use the
original packaging.
• Use the equipment in a dry and clean place with a stable ambient temperature.
10. Storage and Transportation
• Keep the equipment in a dry and clean place, with good ventilation and free of corrosive gases and
flammable or corrosive atmospheres.
• Prevent the equipment from getting wet and suffering blows that could affect the equipment during
transport.
11. Technical data
Specifications CODB-TC1 CODB-TC2
Voltage [VAC] 220-240 220-240
Frequency (Hz) 50/60 50/60
Power output/input[W] 165 250
Nº of blocks 1 2
Dimension of the housing block [mm] 96 x 76 96 x 156
Temperature range [°C] T
Amb
+5° - 150°C T
Amb
+5° - 150°C
Temperature display LED
Temperature stability < 60 °C [°C] ±0.2 °C ±0.5 °C
Temperature stability of the blocks > 60
°C [°C] ±0.2 °C 1
Temperature uniformity [°C] ±0.2 °C ±0.5 °C
Heating time with external probe
[°C/min] 5 4.5
Time range 1 – 99h 59min 1 – 99h 59min
Timer Si Si
Dimensions [W x D x H mm] 152 x 86 x 190 152 x 86 x 300
Weight [Kg] 1.5 (without heating
block) 2.5 (without heating
block))
Allowed temperature 5-40 °C 5-40 °C
Allowed humidity 80% 80%
Protection needed
(according with DIN EN 60529) IP 21 IP 21
External probe connector DIN 12 878 DIN 12 878
External sensor variation <=± (0,15 + 0,002xITI) <=± (0,15 + 0,002xITI)