5
4.
Control elements
1.
“Run/Stop”
4. LED screen
7. ON button
2.
Command adjust parameters 5. Thread for support
3.
Program memory
6. USB connector
5.
Operation
To be able to operate the device it will be necessary to connect it to an electrical outlet and
ensure that it is deposited on a stable surface with a minimum distance of 30 cm on each side.
5.1. Temperature Setting
The temperature setting can only be workable when the machine is powered on but not in working.
Press the blue knob; the temperature value on the LED display will flash, and then set the temperature
by horizontal rotation of the knob.
NOTE: Celsius and Fahrenheit
You can change the temperature scale by pressing buttons P1 and P2 simultaneously
5.2. Time Setting
The time setting can only be workable when the machine is powered on but not in working. Press the
blue knob twice; the time value on the LED display will flash, and then set the time by horizontal
rotation of the knob.
5.3. Memorize programs
The system can save 4 different settings of temperature and time. To save them, press (P1, P2, P3 y
P4) once both parameters have been selected. You will be able to switch through the memorized
programs by turning the blue knob
1
2
3
4
5
6
7
Summary of Contents for CODB150
Page 24: ...www labbox com ...
