LBS DRAGON POWER 3 User Manual Download Page 2 | Manualshive

Page: 2 / 62

LBS DRAGON POWER 3 User Manual Download Page 2

www.lbspower.com

Foreword

Description

Symbol

Alerts you to a high risk hazard that could, if not avoided,

result in serious injury or death.

Alerts you to a medium or low risk hazard that could, if

not avoided, result in moderate or minor injury.

Alerts you to a potentially hazardous situation that

could, if not avoided, result in equipment damage,

data loss, performance deterioration, or

unanticipated results.

results.

Anti static prompting

Be care electric shock prompting

Provides a tip that may help you solve a problem

Summaries

Thank you for choosing the Uninterruptible Power System (hereinafter referred to
as the "UPS") product!

This document gives a description of the (10-40kVA) series UPS, including the
features, performance, appearance, structure, working principles, installation,
operation and maintenance.etc.

Please save the manual after reading, in order to consult in the future.

Symbol Conventions

The manual quotes the safety symbols, these symbols used to prompt users to
comply with safety matters during installation, operation and maintenance. Safety
symbol meaning as follows.

«
1
2
3
4
...
»

Summary of Contents for DRAGON POWER 3































































Reviews:

No comments