3
LAZER BULLET 2.0
The Lazer Bullet 2.0 helmet can
accept the
Inclination Sensor
system to help you find your
perfect
aerodynamic position
. This body
posture meter can help track your
current head position and via
sound
and/or vibration
guide you to your
perfect position.
A)
To install the
Inclination sensor
,
first mount the sensor to it’s
baseplate.
Then mount the baseplate to the back
of the helmet using the mushroom
install mounts on the baseplate, and
push these into the snap baskets that
are located at the rear of the helmet.
B)
To remove the Inclination Sensor,
grab the sensor and baseplate and
gently pull it away from the helmet.
Once the mushroom install mount
release from the snap baskets, the
Sensor unit is free to move.
C)
Switch the inclination sensor on by
pressing on the ON button.
To set your inclination sensor up,
connect it to the computer and use
the provided software.
Please read the Inclination Sensor
manual for more detailed instructions.
3. How to install the Inclination Sensor?
3B)
3C)
3A)
