Defender Press Brake Guarding System Operation Manual
LS-CS-M-069
Page 1
Original Language Version: 1.04
Released:
01/04/2020
1
About This Manual
This section contains information about this manual. It contains the following sections:
•
Document Objectives.
•
Technical Competence Requirements.
•
Document Organisation.
•
Related Documentation.
•
Guides to Notes, Cautions and Warnings.
•
Obtaining Technical Assistance.
1.1
Document Objectives
This manual provides information about the operation of the Lazer Safe Defender Press
Brake Guarding System.
1.2
Technical Competence Requirements
All operators of the Defender Press Brake Guarding System should be trained in its use, and
the press brake upon which it is installed in a manner that complies with established safety
practices.
1.3
Document Organisation
This manual is organised into the following chapters:
1. About This Manual.
2. Critical Safety Information.
3. System Overview.
4. Transmitter and Receiver Adjustment.
5. The Defender User Interface.
6. System Operation.
7. User and Supervisor Menus.
8. Operator Instruction and Demonstration.
9. Maintenance.
10. Glossary of Terms.
1.4
Related Documentation
This manual (Defender Press Brake Guarding System Operation Manual) should be used in
conjunction with the following documents:
•
Lazer Safe Defender Press Brake Guarding System Installation Manual (LS-CS-M-
070).
•
Lazer Safe Alignment Guide (LS-CS-M-017 Rev 2.0).
•
Safety of Machine Tools
– Hydraulic Press Brakes EN12622:2009.
•
Safety Requirements for Power Press Brakes ANSI B11.3
– 2012.
•
Code for Power Press Operation: Health, safety and safeguarding requirements CSA
Z142-10.
•
The operation manual for your press brake.
