Sentinel Press Brake Guarding System Operation Manual
LS-CS-M-066
Page 20
Original Language Version: 1.06
Released:
03/07/2019
A
B
LC
Figure 5-4: Sensor Window
5.5
Mode Select Screen
The other screen used in most typical machine operations is the Mode Select screen. This
only differs from the Main screen in the function of the five input buttons.
The buttons are used to select the different guard modes (the modes are detailed in
Sections
). The operation of the Mode Select screen and the Sensor window symbols is
explained in
Section 6.
Label
Button Function
This leaves the Mode Select screen and returns to the Main screen.
See
for an overview of the menu system.
GUARD
MODE
This button cycles through the guard modes: Normal
→
Tray
→
Tray 2
→
Normal etc.
FIELD
MUTED
If this button is enabled, it toggles the Field Muted mode. The
functionality of this button can be configured in the Supervisor menu.
MUTE
STOP
If this button is enabled, it toggles the Stop at Mute mode. The
functionality of this button can be configured in the Supervisor menu.
BACK
GAUGE
This button toggles the Back Gauge mode.
Table 5-2: Mode Select Screen Buttons
FI ELD
M UTED
G UAR D
M OD E
M UTE
STOP
BACK
G AUG E
ACTI ON
PRESS FOOT PEDAL
OVERRUN TEST
0000
STATUS
A
B
Figure 5-5: Mode Select Screen
Light Curtain
If light curtain guarding is
selected this symbol shows
the status of the receiver
sensor
– green for clear, red
for obstructed.
Material
This symbol shows that the
guarding is set to Normal
mode. This symbol will
change when Tray or Tray 2
modes are selected.
Sensor A, B
If laser guarding is
selected these symbols
show the status of the
FRONT, MIDDLE
and
REAR
of the laser sensors
– green for clear, red for
obstructed.
Back Gauge
This symbol appears when
Back Gauge mode is
enabled.
