Page 46
For HELP, call In-Touch at 866.461.3123
Filters
The filters in your spa should be removed and cleaned every week with
our special Filter Cleanser and typically replaced every 4-6 months
(depending upon use). You can clean your filters with the water pressure
from the end of a garden hose then rinsed with warm water. This
ensures that the water is being filtered properly.
DO NOT USE BLEACH
. We recommend having replacement filters on
hand that can be swapped between cleanings. Doing so enables you to
quickly exchange the dirty filters with the clean ones and immediately
start your spa again. Call our order line at 866.461.3123 to order
replacement filters and our special Filter Cleanser.
Jets
Remove and clean the jets as needed using our special Plumbing
Cleanser, water, and a cloth or soft-bristled brush. Call our order line at
866.461.3123 to order our special Plumbing Cleanser.
Light
Drain the spa and clean the light lens as needed using an optical cloth
and an eyewear cleaning product specifically designed not to scratch
optical surfaces. If the back side of the lens is also dirty remove the rear
panel, remove the light from the holder, and clean in this same manner.
Monitor
Turn off the monitor and clean with computer-grade monitor cleaners and
soft, non-abrasive cloths. Moisten the cloth with the cleaner and then
wipe the monitor. Use another cloth to dry.
DO NOT USE HOUSEHOLD
GLASS CLEANERS
such as those containing ammonia or ethanol, or
paper towels to clean the monitor.
Pillows
Remove and clean the headrest pillows as needed using our special All
Purpose Cleaner and rinse thoroughly with warm water. Call our order
line at 866.461.3123 to order our special All Purpose Cleaner.