Page 41
For HELP, call In-Touch at 866.461.3123
PROBLEM
CAUSE
SOLUTION
Moved my
spa and now
it
Wiring error
at GFCI
Check Neutral wiring of GFCI (see
diagrams on pages 11-15)
doesn’t work
No power to
spa
Reset circuit breakers on GFCI panel
and main circuit breaker panel
Nothing
works
Breaker has
tripped
Check and reset breaker. If problem
persists, check for loose electrical
connections. Check for Neutral wiring
error at GFCI.
Pump not
running
No power to
spa
Reset circuit breakers on GFCI panel
and main circuit breaker panel
Pump runs
continuous
Normal
Spa is equipped with constant filtration
system (see page 25)
Speaker
does not
pop up
Speaker
mechanism
broken
Replace speaker.
Water does
Air lock
Bleed air from the system (page 39)
not flow
Closed jets
Open all jets by turning
counterclockwise
ACV open
Close air control valves
See also
Circulation Pump
on page 40
Water too
hot
High set
temperature
Turn down set temperature on topside
control panel
High ambient
temperature
Remove the cover from the spa
Water will
not heat
Thermostat is
set too low
Check and reset to desired temperature
Air open
Close air control valve
Dirty filter
Check and clean filter
Blown fuse
Check and replace fuse
Slide valve
closed
Check and open all valves
Cover off
Put cover back on spa
Spa in
Standby
Press the Standby button and take spa
out of Standby (see
Standby Mode
on
page 23)