Page 3 of 5
CAUTION
: Read all the instructions before assembly.
Failure to do so may result in faulty assembly and potential injury!
Assemble product on a soft, non-abrasive surface such as a carpet or cardboard to avoid damaging the
item. Seek assistance to assemble bulky or heavy items.
After final alignment, make sure all bolts and nuts are securely tightened with screw head covers
pressed in place.
PARTS LIST
Item Part
Name
Picture Qty
A
Front and Back Panel
2
B
Side Panel
2
C
Bottom Panel
1
D
Top Panel
1
E
M6X15mm Hex Head Bolt
8
F
Steel Washer (M6)
8
G
Hex Head Bolt Cap (M6)
8
H
Open wrench
(M6&M8)
1
Don’t tighten Bolts until Product is completely assembled.
Step 1. Attach the side panels (B) to back panel (A) with M6X15mm hex head bolts (E), steel washers
(F).
Note:
The 2 bar receiver holes on the inner side of back panel should be in the bottom side. See
Figure 1.
Figure 1
Step 2. Insert the exposed bars on the center of bottom panel (C) into the 2 bar receiver holes on the
