LAWO V_pro8 Installation & Operation Manual Download Page 21

Page: 21 / 109

V_pro8 Manual

V1.0/2

Installation & Configuration
Frame Installation

Frame Installation

Front View

Rear View

The

pro8

can be mounted either in a 19" equipment rack or on a table top as follows:

19" Rack-Mounting

- fix the optional rack-mounting brackets to the front of the chassis. Then

attach to a standard 19" equipment rack. Please install supporting slide bars to hold the
weight of the unit.

Table Top

- the unit should be laid on a flat, horizontal surface.

Plug-in connectors are located at both the front and rear. Therefore, make sure that all
connectors are accessible.

When using 19’’ racks with doors please leave enough room for the cables!

Dimensions and Weight

Width: 480.3mm (19“)

Depth: 457.5mm (18")

Height: 1RU

Weight: 4.6kg (10 lbs and 2.26 oz)

Temperature and Cooling

The unit is fitted with six fans inside, and ventilation holes on the left and right. Proper operation is
guaranteed between temperatures of 0° C and 40° C and a maximum relative humidity of <= 90%
non-condensing.

Warning

DO NOT

obstruct the ventilation holes as to do so will prevent efficient cooling.

Summary of Contents for V_pro8














































































































Search results

Summary of Contents for V_pro8

Reviews:

Related manuals for V_pro8

Brands by name

Popular brands

LAWO V_pro8, Installation & Operation Manual

Search results

Summary of Contents for V_pro8

Reviews:

Related manuals for V_pro8

Brands by name

Popular brands