Tutorial
52/ 68
V1.3/0
Routing Masters to Output Destinations
So far we have looked at how to route sources into channels,
assign channels to group and sum masters, and monitor the
various paths. Next let’s look at how to assign your groups and
sum output to new destinations, for example to feed a recorder
or distribution chain. The operation is very similar to routing a
new source to a channel, only this time we are going to select
the bus master channel as our source (e.g. SUM 1) and a
physical output (e.g. AES output 1) as our destination:
1.
Press the SIGNAL button, located on the SCREEN
CONTROL panel, to view the Signals display:
2.
Using the trackball or navigation buttons, select the
source directory (e.g. Bus Out) and sub-directory (e.g.
DOut Sum 1-28) on the left of the display.
Your selections are highlighted in black and the Source Name
and Label columns update to show all available sources.
3.
Now select either the Name or Label for the source you
wish to route (e.g. SUM1).
Your selected source is highlighted in black.
4.
Next, select the destination in a similar fashion. For
example, select Digital as your directory; HD AES 1-24 as
the sub-directory followed by AES3_001 from the Name
and Label list.
Your selected destination is highlighted in black.
Summary of Contents for mc266
Page 1: ...mc 66 Tutorial Version V1 3 0 Edition 05 12 14...
Page 3: ......
Page 6: ...Table of Contents mc 66 V1 3 0 7 68...
Page 9: ......