mc²36 MKII Installation & Service Guide
Version: 1.0/1
44/56
5. Service Procedures
7.
Using a 8mm hex socket, remove the five nuts holding the PSU block in place:
Take care
NOT
to drop any nuts or washers into the desk.
8.
Remove the PSU block from the frame.
9.
Now fit the replacement and secure using the five hex nuts shown in step 7.
10.
Replace the power, signal and grounding cables (see steps 4 to 6).
11.
Replace the Overbridge panel and TFT display.
12.
When everything is back in place, re-connect the rear mains IEC power connectors, and power on.
