background image

WARRANTY

SAVE YOUR RECEIPTS. THIS WARRANTY IS VOID WITHOUT THEM.

21

We take pride in producing a high quality, durable product. This Lawnmaster® product carries a 

limited two (2) year warranty against defects in workmanship and materials from date of purchase 

under normal household use. If product is to be used for commercial, industrial or rental use, a 30 day 

limited warranty will apply. Warranty does not apply to defects due to direct or indirect abuse, 

negligence, misuse, accidents, repairs or alterations and lack of maintenance. Please keep your 

receipt/packing list as proof of purchase. This warranty gives you specific legal rights, and you may 

have other rights, which vary from state to state. For product service call Customer Service at (866) 

384-8432.

Items not covered by warranty :

1.

2. 

3. 

4. 

5. 

Transportation Charges : 

Transportation  charges  for  the  movement  of  any  power  equipment  unit  or  attachment  are  the                  

responsibility of the purchaser. It is the purchaser’s responsibility to pay transportation charges for 

any part submitted for replacement under this warranty unless such return is requested in writing by 

LawnMaster.

Any part that has become inoperative due to misuse, commercial use, abuse, neglect, accident, 

improper maintenance, or alteration;

The unit, if it has not been operated and/or maintained in accordance with the owner's manual;

Normal wear, except as noted below;

Routine maintenance items such as lubricants, blade sharpening;

Normal deterioration of the exterior finish due to use or exposure.

Summary of Contents for TE1016M


























Reviews: