LawnMaster NPTBL31AB, Operator'S Manual

Page: 14 / 80

14
■ Assemble rear blower tube to the flexible hose on blower and tighten the screw with supplied socket
wrench (Fig. 6 & 7).
■ Insert the widest end of the front blower tube into the front opening on the rear blower tube. Align
the indexing tabs with correct sized index channels; once achieved, turn clockwise to lock into
place. Then insert the blower nozzle into the front blower tube. Align the indexing tabs with correct
sized index channels; once achieved, turn clockwise to lock into place (Fig. 8).
NOTE:
This product comes with 2 front blower tubes. Front blower tube is optional. Depending on
stature, the operator may or may not use front blower tube or both front blower tubes. The blower
nozzle is optional. Assemble it when high air speed is required.
INSTALLING AND REMOVING THE BATTERY PACK (See Figs. 9-10)
To install the battery pack:
■ Align the battery pack with the battery slot.
■ Insert the battery pack into the battery slot until the battery pack secures into place. Make sure the
battery inserted in the correct direction (Fig. 9).
■ Do not use force when inserting the battery pack. It should slide into position and "click".
To remove the battery pack:
■ Locate the battery release button, press and hold the button up (Fig. 10).
■ Slide the battery pack off the battery slot.
ASSEMBLY
Front Blower Tube
Blower Nozzle
Indexing
Tab
Fig. 6
Fig. 8
Fig. 7
Front Blower Tube
Index
Channel