LawnMaster NPTBL26A, Service Manual

Page: 35 / 40

35
%7KHEDWWHU\LQGLFDWRU/('ÀDVKLQJUHGLQGLFDWHVWKDWWKHEDWWHU\YROWDJHLVWRRORZDQGQHHGVWREH
charged.
&7KHEDWWHU\LQGLFDWRU/('ÀDVKLQJJUHHQLQGLFDWHVWKDWDVKRUWFLUFXLWKDVRFFXUUHGLQWKHHOHFWULF
starter part. Check the electric motor and the motor drive lines as below:
Open the handle assembly and disconnect the male and female terminals of the motor drive lines (blue)
)LJ3UHVVWKHVWDUWEXWWRQDQGFKHFNLIWKH/('ÀDVKHVJUHHQ/('GRHVQRWÀDVKWKHVKRUW
FLUFXLWRFFXUVLQWKHHOHFWULFPRWRURUWKHPRWRUGULYHOLQHVRIWKHHQJLQH/('ÀDVKHVJUHHQWKHVKRUW
circuit occurs in the motor drive lines of the handle.
'$OWHUQDWHUHGDQGJUHHQÀDVKLQJRIWKHEDWWHU\LQGLFDWRU/('LQGLFDWHVWKDWDQRYHUFXUUHQWRFFXUVLQ
the electric starter part. Check if the engine is stuck and cannot be rotated smoothly. Check if there
LVDQ\IRUHLJQPDWWHUVXFKDVPHWDOPDJQHWL]HGRQWKHÀ\ZKHHO
E. If the battery indicator LED is continuously on, check if an open circuit has occurred from the PCB
output to the motor connecting line.
When pressing the start button and the LED is continuously on, test the voltage output in the motor
drive lines using the DC voltage stall of multimeter (Fig. 62).
If there is voltage output, the possible causes are as below:
7KHHOHFWULFPRWRUKDVEURNHQ
2) The motor drive lines of the engine have detached from their welding position to the electric
PRWRU
3) There is a loose or failed connection from the motor drive lines of the engine to the male and
female terminals in the corrugated pipe buckle.
If there is no voltage output, the possible causes are as below:
1) The motor drive lines of the handle have detached from
WKHLUZHOGLQJSRVLWLRQWRWKH3&%
2) There is a loose or failed connection from the motor drive
lines of the handle to the male and female terminals in the
corrugated pipe buckle.
NOPULL TM STARTER SYSTEM
Fig. 61
Fig. 62
Terminals
Test by
multimeter