28
MAINTENANCE
Fig. 29
Fig. 28
■ Reinstall the spark plug cap into place.
NOTICE:
Be careful not to cross-thread the spark plug. Cross-threading will seriously damage the
product.
STORAGE
Clean the blower of any debris and store indoors in a dry, well-ventilated area that is inaccessible to
children. Keep away from corrosive agents such as garden chemicals and de-icing salts.
Abide by all ISO and local regulations for the safe storage and handling of gasoline.
Storing for 30 days or longer:
Drain all the fuel from the tank into a container approved for storing gasoline. Press the primer bulb 3 -
4 times to remove the remaining fuel from the carburetor. Run the engine until it stops.
HIGH ALTITUDE ENGINE OPERATION
Initially your engine is configured for operation below 2000 ft. altitude. If the blower is being used
above 2000 ft. altitude, the engine must be re-configured accordingly. Operating the engine with the
wrong engine configuration at a given altitude may increase its emissions, drop fuel efficiency, reduce
performance and cause irreparable damage. Engines configured for high altitude operation will need to
be reconfigured for use in standard altitude conditions. Your authorized service center should ensure
that your engine is properly configured for your location.
THIS PRODUCT WAS MANUFACTURED WITH A CATALYST MUFFLER
Congratulations! You have made an investment toward protecting the environment. In order to maintain
this product’s original emission level, please refer to the maintenance section below.
Outer Electrode
0.026 in. (0.65 mm)
Summary of Contents for NPTBL26A
