14
SERVICE & ADJUSTMENTS
•
Identical replacement parts are available from
the manufacturer. In order to obtain replace-
ment parts, the use of parts that do not meet
the original equipment specifications may lead
to improper performance, and may compromise
safety.
•
Before cleaning, repairing, or inspecting, verify
that the blade and all moving parts have come
to a complete stop. Remove the battery when
making any adjustments or when any of the
four wheels must be lifted off the ground.
•
Keep the handles dry, clean, and free of oil and
grease.
•
In order to reduce the risk of fire, keep the mo
-
tor free of grass, leaves, and debris build-up.
•
Check the blade and motor mounting bolts for
proper tightness frequently. Visually inspect
blade for damage (e.g., bent, cracked, or worn).
•
For best and safest performance, maintain the
mower with care. Keep the mower blade sharp
and clean. Mower blades are sharp, and can
cut. Wrap the blades or wear gloves, and use
extra caution when servicing.
•
Keep all nuts, bolts, and screws tight in order to
be sure that the equipment is in safe working
condition.
•
Never tamper with safety devices. Check them
regularly for proper operation.
•
After striking a foreign object, stop the motor.
Thoroughly inspect the mower for any damage.
Repair any damage before operating the
mower.
•
The grass catcher components, discharge
cover, and trail shield are subject to wear and
damage, which could expose moving parts or
allow objects to be thrown. As a safety precau-
tion, check these components frequently, and
immediately replace any parts that show signs
of wear, or that are cracked or broken. Use
original equipment manufacturer’s parts only.
Problem
Possible Cause
Solution
The mower does not start
The battery is not charged.
The switch is defective.
Grass jammed between the deck
and blade.
The battery is not fully inserted in
the mower.
Battery may require service or
replacement.
Key not in place.
Charge the battery. Replace the
switch.
Remove battery; check under deck
for jams.
Check the connection between the
battery and the mower. Make sure
the battery clicks into place.
Replace battery.
The mower cuts the grass unevenly
The lawn is rough or uneven.
The cutting height is not set
properly.
Check the mowing area.
Move the wheels to a higher setting.
The mower does not mulch properly Wet grass clippings are sticking to
the underside of the deck.
The mulching plug is missing.
Wait until the grass dries before
mowing.
Install the mulching plug.
The mower is hard to push
The grass is too tall, or the cutting
height is too low.
The rear of the grass catcher bag is
dragging in thick grass.
Raise the cutting height.
Empty the grass clippings from the
grass catcher bag.
The mower is excessively noisy
and vibrates
The motor shaft is bent.
The blade is unbalanced.
Stop the motor, and inspect for
damage.
Repair before restarting.
