LawnMaster L951151, Translation Of The Original Instructions For Use

Page: 18 / 33

18
Observe the following points in particular:
• Check the cutting tools for damage and wear.
• Correct installation of the cutting head
• Easy movement of all switches
• Secure sit of the spark plug connector. If the connector is loose, sparks can be
formed and thus ignite any leaking fuel
• Ensure the handles are clean in order to be able to guide the equipment safely.
• All safety and protective devices must be properly installed and in place before
the equipment can be started.
The nylon head must be able to run freely.
Before starting the equipment, ensure that the nylon head is sitting correctly and that the moving
parts are free.
1. Put on the shoulder strap (28) and close the strap clasp (38).
2. Adjust the strap so it fits tightly.
3. Adjust the strap so the spring clip (39) is around 10 cm below the hip.
4. Fix the spring clip onto the carry ring for shoulder strap (23) on the equipment.
Warning!
If there is any doubt, seek help with the operation of this equipment from a specialist
in an authorised service centre.
Always wear a shoulder strap when working with the equipment. Always
switch off the equipment before loosening the shoulder strap. Risk of
accidents.
Putting on the Shoulder Strap (Picture 9):
Unhook the equipment before starting the engine and fix it to the carrying
strap with the engine running.
Warning!
Before initial operation of the equipment, it must be checked that the condition
is safe for operation. If there is any doubt, do not start the equipment.
Initial Operation
OPERATION