23
• Do not work on a ladder.
• Work only on firm and stable bases.
• Always carry the equipment suspended by the shoulder strap or on the tube.
Working with nylon head
• On small grass areas, hold the equipment at an angle of approx. 30° and turn evenly to the right
and left with a semi-circular movement.
• The best results are obtained with maximum grass length of 15 cm. If the grass is longer, mowing
several times is recommended.
• To cut around trees, fence posts or other obstacles, go slowly around the obstacle with the
equipment and cut with the tips of the cutting line.
• Avoid contact with solid obstacles (stones, walls, board fences etc) otherwise the line will quickly
wear out. Use the edge of the mowing guard to keep the equipment at the correct distance.
Caution! Do not place the cutting head on the ground during operation!
Working Notes
• When cutting, observe the countryspecific / local regulations.
• Do not cut during commonly applicable quiet periods.
• Solid objects such as stones, metal pieces or similar must be removed. These can be thrown out
and therefore result in personal or property damage.
• When cutting in high bushes or hedges, the working height should be at least
15 cm. This prevents the risk to animals, e.g. hedgehogs.
Emergency stop
Turn the engine switch to the “o” (stopping) (40) position.
Work safely and considerately!
• Always hold the equipment firmly and securely with both hands (see picture 9).
• Cut only grass and weeds. Be aware of roots or tree stumps – risk of tripping.
• Work considerately and endanger nobody when cutting. Work quietly and carefully.
• Work only in adequate visibility and lighting conditions.
• Keep an eye on the cutting head.
• Never cut above shoulder height.
• Never replace the plastic cord with a steel wire – risk of injury and damage.
Summary of Contents for L951151
Page 29: ...29 TROUBLESHOOTING...
