17
MAINTENANCE
WARNING
CLEANING THE BLADES
● Keep the cutting blades clean and free of debris.
NOTE:
Remove battery before performing any maintenance.
● Use a brush or high pressure air (max. 3 bar) to remove debris from the blades.
● With gloves on, clean the product with a dry cloth to remove loose material.
● Apply a small amount of suitable lubricant on the cutting device to retain a good cutting
performance.
● Keep the cutting device sharp. Have a worn or damaged cutting device replaced with a new one
of the same type by a qualified specialist.
● Adjustment of the distance between blades is not necessary, as this is predetermined by the
manufacturer.
In order to avoid personal injury and the risk of fire and electric shock, remove the battery pack
before adjusting, inspecting, or cleaning the hedge trimmer.
WARNING
Wear safety gloves when working on the cutting device and close to it! Use appropriate tools to
remove debris e.g. a brush or wooden stick! Never use your bare hands!
WARNING
Always wear eye protection when operating or performing any maintenance on this product.
Failure to do so, could result in injury.
Remove The Battery Pack.
1. Clean the product with a dry cloth. Use a brush for areas that are hard to reach.
2. In particular clean the air vents (5) after every use with a cloth and brush.
3. Remove stubborn dust with high pressure air (max. 3 bar).
Check for any damage and wear. Repair damages in accordance with this instruction manual.
Summary of Contents for CLHT2422
Page 20: ...EXPLODED VIEW CLHT2422 EXPLODED VIEW 20 ...
Page 22: ...NOTES 21 ...
