A - Cord Retainer
B - Loop
C - Plug
D - Extension Cord
A
B
C
D
18
OPERATING THE BLOWER/VAC
See Figure 12.
■ To keep from scattering debris, blow around the outer edges of a debris pile. Never blow directly
into the center of a pile.
■ To reduce sound levels, limit the number of pieces of equipment used at any one time.
■ Use rakes and brooms to loosen debris before blowing. In dusty conditions, slightly dampen
surfaces when water is available.
■ Watch out for children, pets, open windows, or freshly washed cars, and blow debris safely away.
■ During operation, hold the device with one hand on the casing grip and the other on the additional
grip. (Fig. 12)
■ Operate power equipment at reasonable hours only - not early in the morning or late at night when
people might be disturbed. Comply with the times listed in local ordinances.
■ After using blowers or other equipment, CLEAN UP! Dispose of debris properly.
■ This blower is equipped with Overheating Protection for consumer safety. If the tool overheats or the
current is high, the tool will automatically shut-off. Turn the tool off and unplug. It will take several
minutes for the tool to revert back to its normal temperature, at which point it can be restarted.
OPERATION
Fig. 10
Fig.11
A - Power Switch
B - ON
C - OFF
D - Airstream Regulator
E - Low Speed
F - High Speed
B
E
A
F
D
C
Summary of Contents for BV1210E 1201
Page 16: ...16 ASSEMBLY Fig 7 Fig 8 Fig 9...
Page 23: ...23 EXPLODED VIEW...
