3
Only operate this hedge trimmer once correctly and fully assembled.
Switch the hedge trimmer off immediately if you notice any changes in the machine.
Never leave the hedge trimmer unsupervised.
If the cutting bar becomes jammed or blocked by obstacles, switch the engine off
immediately and visually inspect the cutting bar for damage. Note, if the cutting bar is
damaged, repairs and servicing must only be performed by authorised dealers and
service agents.
Cut at high engine speeds. Never start the machine while the cutting bar rests on an
object.
WARNING:
Petrol and its vapours are highly flammable. Always stop the engine
before refuelling. Do not smoke or light any flames while refuelling. Wipe off any fuel
that may have spilled. Refuel in a well ventilated area and never in closed
environments. Start the engine away from the place where it was refuelled. Ensure
the tank cap is tightened properly. Return the hedge trimmer to its normal operating
position before starting.
CAUTION:
Exhaust fumes are toxic and asphyxiating. Inhalation may be lethal. Do
not start the engine in closed or poorly ventilated environments.
LIST OF MAIN PARTS
1. Front handle
2. recoil starter
3. Fuel tank
4. Engine switch
5. Throttle trigger lockout
6. Rear handle
7. Throttle trigger
8. Handle Locking knob
9. Air filter
10. Blade Safety Guard
11. Cutting blade
12. Fuel mixing bottle
13. Socket spanner
14. Screw driver
15. Safety shield
Fig. 1
15
