DO NOT connect the master valve output terminal directly to the
pump start terminals. This WILL damage the controller.
Master Valve/ Pump Start
The Master Valve/Pump Start will operate whenever any valve is
on. This allows a pump to draw water from a well or other source,
or opens the master valve whenever watering occurs. The
practice of using a pump is common in some areas and rare in
others. (If you do not have a pump start or master valve installed,
you will not notice this feature,)
Power Failures
Due to the possibility of power failures, the controller has a
factory set safety default program which assures watering even if
your programs have been lost due to a discharged or missing
back-up battery. The default program is set to run all valves for
ten minutes each, every day of the week. The default is factory
set in Program A.
Note: You
may change Program A to suit your needs without
affecting the default. You may change all the programs to
suit your specific needs, without affecting the factory default
values. There is no factory default for program B.
Note:
This controller is only intended for use in an automatic
irrigation sys tern.
Fuse (1amp)
A replacement fuse is provided with this controller. Further
replacements can be obtained from the dealer who supplied this
controller.
WARRANTY
Limited Warranty: Hardie Irrigation warrants to its customers that
this product will be free from defects in materials and
workmanship for a period of three years from the date of
purchase. We will replace, free of charge, the part, or parts found
to be defective under normal use and service for a period of three
years after purchase, proof of purchase required.
We reserve the right to inspect the defective part prior to
replacement. Hardie Irrigation will not be responsible for
consequential or incidental cost or damages caused by product
failure.
For additional assistance, call our Customer Service Hot-line at l-
800-231-5117.
Summary of Contents for Lawn Dial LD-4
Page 1: ......
