Divide up your yard
To accommodate the special watering needs of different
parts of your yard, You can assign Zones to two separate
watering Programs (A and B). Each Program activates the
Zones assigned to it as a group with its own specific set
of watering days and start times.
Decide how frequently each Zone should be watered.
If, for example, Zones covering lawn areas need water
every day, and Zones covering shrubs and ground cover
need water every third day, you might assign all lawn
Zones to Program A and all shrub/ground cover Zones
to Program B.
Program A
Program B
Assign start times to each Program
Now You’re ready to select the times of day that each
Program will begin watering the Zones assigned to it.
Your controller lets you set as many as six start times
a day shared in any combination between Programs A
and B, i.e. 2 in Program A, 4 in Program B. or 3 starts in
each Program and so on. Remember, when you enter
a start time for a program, all Zones in that program will
water in sequence one after the other.
To set the start times for Program A
A. Press
B. Press
and hold until display shows the desired
hour and (AM) or
C. Press
and hold until display shows the
desired minute (minutes advance in increments of 5).
D. Repeat Steps A through C to set additional start times
for all Zones in Program A.
E. Press
to return to clock mode
10
11
