Checking the Engine Oil Level
Service Interval:
Before each use or daily
1. Remove the dipstick, wipe it clean, and fully install
the dipstick (Figure 14).
Figure 14
2. Remove the dipstick and check the oil level
(Figure 14). If the oil level is below the
Add
mark on
the dipstick,
slowly
pour oil into the oil fill tube to
raise the oil level to the
Full
mark on the dipstick.
Do not overfill.
(Max. fill: 20 oz., type: SAE 30W
detergent oil with an API service classification of SF,
SG, SH, SJ, SL, or higher.)
3. Install the dipstick.
Adjusting the Cutting Height
Adjusting the cutting height may bring you into
contact with the moving blade, causing serious
injury.
•
Stop the engine and wait for all moving parts
to stop.
•
Do not put your fingers under the housing
when adjusting the cutting height.
If the engine has been running, the muffler will
be hot and can severely burn you. Keep away
from the hot muffler.
Adjust the cutting height as desired. Set all four wheels
to the same height.
Note:
To raise the mower, move all 4 cutting height
levers forward; to lower the mower, move them
rearward.
Figure 15
8
Summary of Contents for Insight 10683
Page 18: ...Notes 18...
Page 19: ...Notes 19...
