Setup
Important:
Remove and discard the protective
plastic sheet that covers the engine.
1. Unfolding the Handle
Procedure
1. Move the handle rearward and hold the upper handle
in place (Figure 3).
Figure 3
2. Tighten the upper handle knob as tight as you can
(Figure 4).
Figure 4
3. Tighten the lower handle knobs as tight as you can
(Figure 5).
Figure 5
2. Filling the Engine with Oil
Procedure
Your mower does not come with oil in the engine, but it
does come with a bottle of oil.
1. Remove the dipstick (Figure 6).
Figure 6
2.
Slowly
pour oil into the oil fill tube until the oil
level reaches the
Full
line on the dipstick (Figure 6).
Do not overfill.
(Max. fill: 20 oz., type: SAE 30W
detergent oil with an API service classification of SF,
SG, SH, SJ, SL, or higher.)
Note:
If you overfill the engine, pour some oil out
of it as directed in Changing the Engine Oil.
3. Install the dipstick securely.
Important:
Change the engine oil after the first
2 operating hours
; change it yearly thereafter.
Refer to Changing the Engine Oil.
5
Summary of Contents for Insight 10683
Page 18: ...Notes 18...
Page 19: ...Notes 19...
