Note:
To raise the mower, move all the cutting height
levers forward; to lower the mower, move the all the
cutting height levers rearward (Figure 10).
Figure 10
1.
Raise the mower
2.
Lower the mower
Note:
The cutting height settings are 1 inch (25 mm);
1-1/2 inch (38 mm); 2 inches (51 mm); 2-1/2 inches
(64 mm); 3 inches (76 mm); 3-1/2 inches (89 mm); and
4 inches (102 mm).
Starting the Engine
1. Firmly push in the primer 3 times with your thumb,
holding the primer in for a second before releasing
it each time (models 10643C and 10644C only)
(Figure 11).
Figure 11
Note:
If the air temperature is below 55°F (13°C),
firmly push the primer in 5 times.
2. Hold the blade control bar (Figure 12) against the
handle.
Figure 12
1.
Blade control bar
3. Turn the ignition key (Figure 13) (electric-start
models only) or pull recoil start handle (Figure 14).
Figure 13
Figure 14
Note:
If the mower does not start after several
attempts, contact an Authorized Service Dealer.
8
