Lavorwash RUDY 1200 S, Translation Of The Original Instructions

Page: 9 / 60

lay on dry surfaces and protected against water jets.
• Before vacuuming liquids, check the float functions
correctly. When vacuuming liquids, and when the
tank is full, a fl oat closes the suction opening, and the
vacuum operation is interrupted. Then switch off the
machine, disconnect the plug and empty the tank.
Regularly clean the water level limiting device (float)
and examine it for signs of damage.
• If the equipment should overturn it is recommended
that the machine should be stood up before switching
off.
• If foam or liquid escape from the appliance, switch off
immediately.
• The equipment should not be used to pick up wa-
ter from containers lavatories, tubs, etc.
• Aggressive solvents or detergents should not be
used.
• Service and repairs must be carried out by qualified
personnel only. Only use manufacturer original spare
parts for service repair.
• The manufacturer cannot be held responsible for
any damage/injury caused to persons, animals or
property caused by misuse of the appliance, not in
compliance with manual instructions.
USAGE
(see fig.
③④⑤
)
• Be sure that switch is in off position (0) OFF and con-
nect the machine to a suitable socket.
• The machine must be always kept on horizontal ba-
ses, in a safe and stable way.
• Insert the suitable filters for the proper use.
• Never use the appliance without filters .
• Use the most suitable accessories for the requested
usage.
• Put switch on (-) ON position in order to start the ma-
chine.
• When job is over, switch off (0) OFF and keep away the
plug from the socket.
• If the appliance is used with especially fine dust (size
below 0.3 µm) the filter supplied will require cleaning
more frequently. For especially demanding applica-
tions, the use of specific filters supplied as an optional
(Hepa) may be necessary (see fig.
⑧
).
FILTER CLEANING
(see fig.
⑦
) Filter shaker : If there should be a reduction
in the suction power, operate the filter reset buton
several times to reset the filter
(see fig.
⑨
)
• The machine shall be disconnected from its power
source, by removing the plug from the socket-
outlet, during cleaning or maintenance
1- Remove the filter
2- Shake the filter
sound pressure: LpA = 75 dB (A)
• Once the filter has been cleaned, check whether it
is suitable for further use. If it has been damaged or
broken, replace it with an original filter.
CARE AND MAINTENANCE
The unit is maintenance-free.
•
The machine shall be disconnected from its power
source, by removing the plug from the socket-
outlet, during cleaning or maintenance
• Clean the exterior part of the machine with a dry cloth.
• Move the appliance only by catching the carrying
handle located on the motor head.
• Store the appliance and the accessories in a dry safe
place, out of the reach of children.
WARRANTY CONDITIONS
All our machines are subjected to strict tests and are cov-
ered against manufacturing defects in accordance with
applicable regulations. The warranty is effective from
the date of purchase.
The following are not included in the warranty: -
Parts subject to normal wear. - Rubber parts, charcoal,
filters and the accessories and optional accessories. - Ac-
cidental damage, caused by transport, neglect or inade-
quate treatment, incorrect or improper use and installa-
tion failing - The warranty shall not cover any cleaning
operations to which the operative components may be
subjected, such as clogged nozzles and filter blocked
due to limestones. This pressure cleaner is intended to
be used for domestic and hobby work: the warranty
does not cover any other different kind of use.
DISPOSAL (WEEE)
As the owner of electrical or electronic equipment,
the law (in accordance with the EU Directive
2012/19/EU on waste from electrical and electronic
equipment and the national laws of the EU Member Sta-
tes that have implemented this Directive) prohibits you
from disposing of this product or its electrical / electro-
nic accessories as municipal solid waste and obliges you
to make use of the appropriate waste collection facilities.
The product can be disposed of by returning it to the
distributor when a new product is purchased. The new
product must be equivalent to that being disposed of.
Disposing of the product in the environment can cause
great harm to the environment itself and human health.
The symbol in the figure indicates the urban waste
containers and it is strictly prohibited to dispose of the
equipment in these containers. Non-compliance with
the regulations stipulated in the Directive 2012/19/EU
and the decrees implemented in the various EU Member
States is administratively punishable.
9