I. GUN SAFETY DEVICE
Whenever you need to stop the machine, it is necessary to
use the safety lock
, placed on the gun, in order to avoid
fortuitous openings (fi g. 1).
II. DETERGENT SUCTION
Insert the CHEMICAL nozzle into the lance (fi g. 2A). Plunge
suction hose with fi lter into detergent tank (fi g. 2B). When
you start the machine, the mixing of the detergent with
the water is automatic at the water passage.
CAUTION
: make use only of liquid detergent, do not
absolutely use acid or too much alkaline products. We
suggest you to make use of our products, which have been
studied for the use with washer machines.
III. USE OF THE LANCE
The high-pressure cleaner is supplied with fi ve diff erent nozzle types:
- Low-pressure nozzle (fi g. 3A, “CHEMICAL”): for operating with
detergent or cleaning with negligible pressure,
- 0° nozzle: straight stream (fi g. 3B) for particularly stubborn
accumulation of grime,
- 15° nozzle: fl at spray (fi g. 3C) for dirt accumulation over a large surface,
- 25° nozzle: fl at spray (fi g. 3D) for dirt accumulation over a large surface,
IV. APPLIANCES PROVIDED WITH THERMAL VALVE
This device enables the machine’s by-pass operation through automatic water discharge whenever it
reaches a temperature of nearly 60°C and cooling working components.
CAUTION
: appliances that are not provided with this disposal must not operate for more than
2 minutes with released gun. Recycled water raises its temperature remarkably causing great
damages to the pump.
MONTAGE
Study the series of photos shown below (fi g. 4):
S
S
fi g. 1
fi g. 2B
Deter
g
e
n
t
fi g. 2A
fi g. 3A fi g. 3B
fi g. 3C
fi g. 3D
x 4
x 2
DMJDL
DMJDL
fi g. 4
16
