![background image](http://html1.mh-extra.com/html/lavor/superwash-160/superwash-160_manual_4075967008.webp)
GB
8
Maintenance Cleaning Disposal Troubleshooting
from the gun.
2)Clean the nozzle orifice with the nozzle
cleaning pin provided.
3)Rinse the nozzle under running water.
Disposal
• Disposal must be carried out in accordance
with applicable environmental legislation.
• The appliance and its accessories must
be disposed of in accordance with the
materials used in their construction.
• Disposal must be carried out in accordance
with applicable local legislation. Contact
your municipality for the nearest refuse
dumping site.
• As owner of an electrical or electronic
product, you are not allowed by law
(according to EU-Directive 2002/96/EC of
27 January 2003 on waste electrical and
electronic equipment and the particular
national laws of the EU-Member States
transforming this Directive) to dispose of
this product or its electrical/electronic
accessories as unsorted domestic waste.
You shall use the designated gratis
possibilities for return instead
Troubleshooting
Fault
Cause
Repair
The pump does not
start when the switch
is pressed.
• The plug is not properly
connected to the
socket.
• Faulty electric plug.
• The mains voltage is
insufficient.
• The gauge of the
electrical power lead is
too small.
• The pump has cut out.
• Connect the plug to the
power socket correctly.
• Have the electrical
socket checked.
• Check that the system
is suitable.
• See paragraph “Safety
notes / electrical
connection”.
• Turn the switch to ON
while keeping the gun
lever pressed; if the
problem persists
contact an authorised
service centre.
Fault
Cause
Repair
The machine starts, but
no water comes out.
• Pump, hoses or
accessories frozen.
• No water supply.
• Unit water filter clogged.
• Nozzle or spray gun
orifice clogged.
• Allow the pump and
hoses to thaw.
• Connect the machine to
the water supply system
and turn on the tap.
3
13
3