background image

GB

2

    Introduction

Introduction

Please read this instruction manual
thoroughly, referring to it whenever
necessary before starting a job. This is
because, as with all appliances, the high-
pressure cleaner must be used correctly in
order to ensure optimum performance.
First of all, open both fold-out pages
containing the illustrations, and study then
carefully until you are familiarised with how
the machine works. These pages fold out
in front of and behind the cover of the
instruction manual.

Intended use

The high-pressure cleaner is ideal for all
outdoor cleaning requirements. It may be
used to clean dirty surfaces such as house
walls, verandas and roads.
A range of optional gun-mounted accessories
is available for foam and rotary brush
washing applications.
The appliance may also be used to clean
walls, swimming pools, garden furniture and
tools, and to wash vehicles.
Always observe all applicable local legislation
concerning cleaning products.
The machine must never be used for any
purposes other than those specified or
modified, as this may be extremely
dangerous. The manufacturer cannot be
held responsible for damages or injury
resulting from inappropriate use or
modifications.

Do not direct the nozzle toward mechanical
parts containing lubricant grease, as the
grease will dissolve and spread over the
surrounding ground.

Vehicle tyres/tyre valves may only be cleaned
from a minimum distance of 30 cm, otherwise
the vehicle tyre/tyre valve could be damaged
by the high-pressure jet. The first indication
of this is a discoloration of the tyre. Damaged
vehicle tyres/tyre valves can be deadly
dangerous.

Standard equipment

Turbo nozzle

Rotary brush

Nozzle with pressure regulator

Gun with pressure gauge

Hose reel stand

Crank handle

Hose reel

Wheel axle

Hook for power lead

Wheel lock plug

Wheel

Handle

Nozzle cleaning pin

Accessory holder

(a) Nozzle holder

(b) Nozzle stand

Rotary regulator

Tank cap

Concentrated car washing detergent

Quick release water inlet connector

Technical specifications
Year of manufacture

2005

Rated voltage

230V    50 Hz

Power rating

2550 W

Max. delivery

max. 8.83 l/min
(530 l/h)

Operating pressure

135 bar (+/-10%)
(13,5 MPa)

Minimum intake pressure 1 bar (0,1 MPa)
Maximum intake pressure 10 bar (1 MPa)
Jet recoil on spray gun

20N

Minimum intake rate

12 l/min

Max. intake water
temperature

40

°

 C

Storage temperature

away from frost
Not below 0

°

C

Weight

21.35 Kg

Acoustic pressure

L

WA

  95db (A)

L

PA

   76db (A)

˜

S

U

R

T

High pressure washer
SUPERWASH 160

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

Summary of Contents for SUPERWASH 160











Reviews: