lavina V25GE, User Manual

Page: 49 / 55

Superabrasive Owner’s manual original language – Lavina
®
V25GE 04/2022
49
IMPORTANT!!! THE CLUTCH HAS BEEN CHANGED! THE CHANGE IS APPLIED TO VACUUMS WITH MACHINE
NUMBER AND HIGHER!
When ordering the clutch 30313000569, make sure you have the washer 28.1 installed (fig. 11.8.1). If you
don’t, you must order also the washer and mount it. The washer serves as a spacer between the engine’s
shaft and the clutch. Also make sure the length of the key pos. 27 is 63mm, if not order V25GX-40.00.10-1.
LAVINA® V25GE POWER UNIT (FIGURE 11.8.2) FOR MACHINES WITH NUMBER 2107V25GE1904 AND HIGHER
No. Item No. Description Pcs. No. Item No. Description Pcs.
1 30301240134 Nut M12 DIN 6923 3 25 30313000556 Washer 1
2 30310000004 Buffer 4 26 L25G-10.02.02 Bearing retainer 1
3
30301240095 Nut M8 DIN 6923 11 27 V25GX-40.00.10-1 Key 1
4 V25GE40.00.07 Blower base plate 1 28 30313000569 CLUTCH 1
5 30310000009 Buffer 3 28.1 30301221053 Washer 1
6
30305000413 Blower
1 29
30313000086 Bolt 4
7 30301210146 Bolt M16x50 DIN933 2 30 FS481V-S HM Kawasaki FS481-S 1
8
30301221008 Washer M16 DIN 125a
2 31
V25GE40.00.04 HEPA inlet elbow 1
9
30301240109 Nut M16 DIN982 2
32
30323000006 HEPA filter c
filter
1
10
30308000155 Belt
2 33
V25GE43.00.00-1 Inlet air pipe 1
11 30301230241 Screw M8X10 DIN913 1 34 30316000079 Relief valve 1
12
V25GE40.00.06 Pulley
1 35
V25GE40.00.05 Gasket 1
13 30301250028 Circlip B28X1.5 DIN471 1 36 30301210117 Bolt M6x20 DIN6921 4
14
30301210114 Bolt М8Х60 DIN933
1
37
V25GE47.00.00 Inlet air pipe – turbine
adapter
1
15 30301210072 Bolt M8X16 DIN6921 6 38 30301240098 Nut М6 DIN6923 4
16 30301221034 Washer М8 DIN433 1 39 30301230018 Screw M8x16 DIN912 4
17 30301230004 Screw M8X25 DIN912 2 40 V20GX40.20.00 Outlet valve assembly 1
18
30301220003 Washer М8 DIN 127B 2
41
30301230243 Screw M6x16 ISO7380F 8
19
L25G-10.00.66 Tensioning device support
1 42
V25GX-90.12.00 Protective cover base 1
20 30301210002 Bolt M8X25 DIN933 1 43 V25GX-90.00.06 Protective cover 1
21
V25GX-40.00.05 Muffler holding plate
1 44
V25GE40.00.09 Reinforcing plate 1
22 30301210107 Bolt M6X25 DIN6921 2 45 30301260066 Key 1
23 30301210031 Bolt M8x20 DIN6921 4 46
V25GE42.00.00
Motor base plate
1
24 30313000087 Bolt 1