lavina V25GE, User Manual

Page: 36 / 55

Superabrasive Owner’s manual original language – Lavina
®
V25GE 04/2022
36
Note:
1. The clamp set (No 3) contains the clamp and the attaching plate and they can’t be
ordered separately (fig. 11.2.1).
2. When mounting the inlet valve (pos.23) the bolts (pos. 5) must be tightened at 6 Nm.
3. Before mounting the inlet valve make sure both sealing rings are in position. The plastic
side of the sealing must be in contact with the inlet valve (fig. 11.2.2).
LAVINA® V25GE VACUUM HEAD COVER - V25GE30.00.00
No. Item No. Description Pcs. No. Item No. Description Pcs.
1
V25GE33.00.00 Vacuum head body
1 13
V25GE30.00.02 Top cover
1
2
30301240114 Nut M4 DIN 985
6 14
30301240095 Nut M8 DIN 6923
1
3
30329000040 Clamp set
3 15
30301210069 Bolt M8x70 DIN 6921
1
4
30301230066 Screw M4x12 DIN 967
6 16
V25GE30.00.01 Bearing plate
1
5
30301210043 Bolt M6x10 DIN 6921
8 17
30301240106 Nut M8 DIN 985
2
6
V25GE31.00.00 Outlet pipe
1 18
30301240098 Nut M6 DIN 6923
10
7
30329000014 Rubber handle
1 19
V25GE34.00.00 Valve plate assembly
1
8
V20X-14.10.00 Handle body
1 20
30301210117 Bolt M6x20 DIN 6923
4
9
V25GE30.00.05 Valve beam
1 21
V25GE32.00.01 Valve base plate
1
10
30301230048 Screw M6x12 DIN 912
2 22
V25GE30.00.04 Seal
1
11
30310000005 Buffer
1 23
V25GE11.00.00 Inlet valve assembly
1
12
30301210048 Bolt M6x12 DIN 6921
6
Figure 11.2.1
Figure 11.2.2
Plastic side