Superabrasive
Owner’s Manual – LAVINA® LB36G-S
5/2018
25
Options Menu Navigation and Use
Options Menu
To enter the options menu, simply scroll until Options Menu is displayed on the screen, then press SELECT. The first option
displayed by default is Add Password. Use the + or – buttons to scroll and view other options. To exit the options menu, scroll
until you see EXIT OPTIONS, then press SELECT.
Add Password- This option allows you to add a password that prevents unauthorized users from resetting service intervals or
performing a factory reset. This is a 4-digit pin that you set.
Change Password- Allows you to change your password, if one is saved. Note: This option is hidden unless a password has
been created.
Remove Password- Used to disable the password feature, if a password is saved. Note: This option is hidden unless a
password has been created.
Factory Reset- CAUTION, this option will erase all memory and restore your device to factory condition. This also allows for
resetting the total engine hours. Password required if set.
Factory Unlock- This option is only used by SuperAbrasive and requires a factory assigned pin number to activate.
Tach Settings- This allows you to adjust the tachometer for a carbureted or fuel injected engine. It should come pre-set to the
correct option and will not require changes.
Equipment Hours- This displays the total number of hours on your equipment and is non-resettable.
Date of Purchase- This can be used by the user or dealer to record the equipment purchase date. To enter the date, hold
SELECT for 2 seconds; a cursor should appear under the MM. Use the + and – buttons to change the month field, then press
SELECT to move to the Day field. Again, use the + and – buttons to select the desired day. Once you have the desired date,
hold SELECT for 2 seconds and a prompt to save the information will appear.
Engine Info- To view the engine model/serial information, scroll to Engine Info in the Options Menu, and press SELECT. To
edit this information, hold SELECT for 2 seconds. Then use the + and – buttons to select the appropriate letters and numbers.
Press SELECT quickly to move the cursor, or hold SELECT for 7 seconds to save/exit.
Equipment Info- To view the equipment model/serial information, scroll to Equipment Info in the Options Menu, and press
SELECT. To edit this information, hold SELECT for 2 seconds. Then use the + and – buttons to select the appropriate letters and
numbers. Press SELECT quickly to move the cursor, or hold SELECT for 7 seconds to save/exit.
Job Timer- The job timer acts as a stopwatch, but only starts and stops when the engine is turned on/off. This allows you to
accurately time how long your engine runs for a particular job.
Exit Options- Returns to the main menu, and default screen (Engine Hours).
Safety Information
Safety Information- Read all safety information before using this device to ensure safe and proper use.
Do not interact with the device while operating your equipment. Doing so may distract your attention and cause an accident,
or may be illegal depending on your region.
Avoid any direct contact with pressure washers, water sprayers or cleaning chemicals of any kind.
Do not drop or cause an impact to the device.
Do not bend or twist the device and/or the wire harness excessively.
Do not disassemble, modify or repair your device. This product contains no user serviceable parts.
FCC Part 15.21
Any changes or modifications to this device that are not expressly approved by the manufacturer may void the user’s
authority to operate the device.
