Superabrasive
Owner’s Manual – LAVINA® LB36G-S
5/2018
13
3. HANDLING AND TRANSPORTATION
ADJUSTING THE HANDLE
The Handle on the frame is adjustable in height and allows the operator to work in a correct and safe posture. Turn the
handle in the upright position to change the tools (Fig. 3.1, Fig. 3.2, Fig. 3.3). Choose the upright position to move easy the
machine (Fig. 3.3).
LIFTING
Three belts are needed to lift the machine. One belt should be hooked on the eye bolt of the operating head, and the other
two on the slots of the carriage (fig. 3.4) (fig. 3.5). The belts length should be considered so their ends connect on one line
above the axle of the wheels. The eye bolt and machine construction is rated only for the weight of the machine. Do not lift
any other loads on the machine. Use always hoisting equipment rated for 350 kg (770 lbs) or more.
STORAGE
Always store and transport the LAVINA®LB36G-S machine in a dry place. Never transport the LAVINA® LB36G-S machine
unprotected; it may be damaged if transported unprotected during rain or snow.
When, during the storage of the machine, the temperature may fall down to or less 32F (or 0
o
C) you
should empty the water from the system using following steps:
-
Pull the hose out of the tank (Fig.3.5) and (Fig.3.6).
-
Divide the two cable of the power cord of the water pump (Fig.3.7).
-
Remove the tank (Fig.3.8)
Figure 3.5
Figure 3.1
Figure 3.2
Figure 3.3
Figure 3.6
Figure 3.7
Figure 3.8
Figure 3.4
Figure 3.5
