lavina ELITE Series, User Manual

Page: 10 / 37

Superabrasive User Manual Original Language Lavina® 14E May 12, 2020
10
2.7 BEFORE YOU BEGIN
Working area must be clear from any debris or objects.
A first-time operator must always read the manual and pay attention to all safety instructions.
All electric connections and cables must be inspected for potential damages.
Ground wire system of the power supply must be also inspected. Perform general daily inspections of the machine and inspect
the machine before each use.
Always inspect the safety devices: Mount the Security plate for the Quickchange pads.
The emergency break must be clear and working.
The tool protector must be working.
The machine must be clean.
Never operate the machine in the rain!
Confirm that there are no missing parts especially after transportation, repair, or maintenance.
Before filling the water tank with water make sure the machine is not working and the main switch is turned off.
Before turning on the machine make sure that the base is placed on the floor, the machine MUST NOT be in an upright
position when turned on!
2.8 OPERATING MACHINE
When operating the LAVINA® E, make certain that there is no one, but you around the machine.
Never leave the machine unattended while working.
The electrical cable must move freely and must be damage-free.
The water hose must move freely and must be damage-free.
Check the floor you will work on to make sure it is not too uneven. If this is the case, it may damage the machine.
2.9 AFTER WORK IS COMPLETED
Clean the machine and its surroundings properly.
Empty and clean the water tank.
Unplug the machine and wind up the electrical cable.
Store the machine in a safe place.
2.10 THE WORK AREA
Make certain that people or vehicles do not enter the work area.
Avoid cables and hoses being in the way. Always check the floor for debris.
2.11 PERSONAL PROTECTION EQUIPMENT (PPE)
Always wear safety shoes when working with the machine. Always wear ear protectors when working with the machine.
All personnel in the immediate work area must wear safety glasses with side shields.
Always wear safety gloves when changing the tools. Always wear clothes suitable for the work environment.
2.12 OPERATOR
The LAVINA® E machine.
The operator must know the machine’s work environment. Only one operator at a time can work with the machine. The
operator must be properly trained and well instructed prior operating the machine.
The operator must understand all the instructions in this manual.
The operator must understand and interpret all the drawings and designs in the manual.
The operator must know all sanitation and safety regulations pertaining to the operation of the machine.
The operator must have floor grinding experience.
The operator must know what to do in case of emergency.
The operator must have an adequate technical knowledge and preparation.