Superabrasive
Owner’s Manual Original Language – Lavina
®
32-S-E
6/2013
22
9. WARRANTY AND RETURNS
Warranty Policy for Lavina
®
32-S-E
Superabrasive Ltd. guarantees that the original purchaser of the Lavina
®
S-E machine will be covered against
defects in material and workmanship for a period of 2 years from the date of delivery or 500 hours of use
whichever comes first.
The following conditions pertain to this warranty:
Applies only to the original owner and it is not transferable.
Machine must not be dismantled and tampered with in any way.
Covered components proven defective will be repaired or replaced at no charge. Covered
components include motors, bearings and switches.
This warranty does not apply to any repair arising from misuse, neglect or abuse, or to repair of
proprietary parts.
This warranty does not apply to products with aftermarket alterations, changes, or modifications.
This warranty is in lieu of and excludes every condition of warranty not herein expressly set out and
all liability for any form of consequential loss or damage is hereby expressly excluded.
This warranty is limited to repair or replacement of covered components and reasonable labor
expenses.
All warranty returns must be shipped freight prepaid.
The above warranty conditions may be changed only by Superabrasive. Superabrasive reserves the right to
inspect and make a final decision on any machine returned under this warranty. This warranty applies to new,
used and demo machines.
Superabrasive does not authorize any person or representative to make any other warranty or to assume for us
any liability in connection with the sale and operation of our products
RETURN POLICY FOR LAVINA
®
32-S-E
Lavina
®
32-S-E machines may be returned, subject to the following terms:
In no case, a machine is to be returned to Superabrasive Ltd. for credit or repair without prior authorization.
Please contact Superabrasive Ltd. or your local distributor for an authorization and issuance of a return
authorization number. This number along with the serial number of the machine must be included on all packages
and correspondence. Machines returned without prior authorization will remain property of the sender and
Superabrasive Ltd. will not be responsible for these.
10. DISPOSAL
If your machine after time is not usable or needs to be replaced, send the machine back to Superabrasive or a
local distributor, where a professional disposal complying with the environment laws and directives is guaranteed.
11. MANUFACTURER’S CONTACTS
If you need to contact Superabrasive Ltd. with technical support questions, below is the contact information.
Address: Superabrasive
Ltd.
Rabotnicheska
2A
BG-6140 Krun
Bulgaria
Email:
Tel.:
+359 431 6 44 77
Fax:
+359 431 6 44 66
Website:
www.superabrasive.com
