11
TARGET VALUE KEYS :
There are typically 3 parameters that the 6300 controls - Altitude, Climb and Airspeed. Each
parameter has its own target value key. The
Pt/AIRSPEED
key is used to select Pt or
Airspeed target value entry, the
Ps RATE/CLIMB
key is used to select Climb value entry, and
the
Ps/ALTITUDE
key is used to select Ps or Altitude value entry. After selecting the target
value key, the new value can be entered using the numeric keypad.
The
UP ARROW
and
DOWN ARROW
keys are used to “Jog” a target value. The arrow keys
are also used to move between various choices during Unit selection and Mode selection. For
more information, please refer to Section 3.2.2.
The
HOLD
key is used to hold the outputs at their current Actual value. This is explained in
detail in Section 3.2.2.
UNITS SELECT KEYS :
Units can be selected independently for the Pt and Ps outputs. Pressing the
Pt UNITS
key
will bring up the choices in Pt units onto the 4th line of the display. To exit from this selection
mode, press CANCEL. To move between the choices use the arrow keys. There are nine Pt
units in all. The cursor location is indicated by the blinking unit mnemonic. Once the cursor
is on the desired units, press 'ENTER' to select that unit.
The
Ps UNITS
key brings up the choices for Ps units onto the 4th line of the display. Use
CANCEL to exit this unit selection mode. Use the arrow keys to move between the choices.
Use the ENTER key to select a choice. There are four Ps units to choose from.
For more information on Units Selection please refer to Section 3.2.3.
MODE SELECT KEYS :
These keys are used to select between one of three operating modes. Pressing these keys
brings up the selection of modes onto the 4th line of the display. The desired selection can be
chosen by moving the cursor using the arrow keys and then pressing ENTER. The GO key
will execute the entered selection. Modes can be selected independently for the Ps and Pt
outputs.
For more information on Mode Selection please refer to Section 3.2.4.
Summary of Contents for 6300L
Page 10: ...3...
Page 11: ...4...
Page 15: ...8...
Page 16: ...9...
