EN
57
TROUBLESHOOTING
Problem encountered
Possible causes
Solution
Red flashing light
.
» Appliance overheated.
» Electrical circuit failure.
» Wait a few minutes and try again.
» Make sure the milk you are using has not been heated
yet.
» Empty milk from container, rinse under cold water
and repeat the cycle.
» Contact Lavazza’s Customer Service.
Milk leaking from the milk
frother.
» Excessive milk amount.
» Observe the levels indicated for the type of
preparation.
The milk has not been
heated, it remained cold.
» Multifunction button pressed
incorrectly.
» Milk frother damaged.
» Make sure you have not used an amount of milk below
the MIN level.
» Contact Lavazza’s Customer Service.
Too hot or burnt milk.
» Incorrect quantity of milk.
» Milk frother damaged.
» Make sure you have not used an amount of milk below
the MIN level.
» Contact Lavazza’s Customer Service.
The milk frother is noisy.
» Components installed
incorrectly.
» Presence of foreign bodies.
» Make sure to have inserted the whisk correctly.
» Make sure that the lid is properly fitted into place.
» Make sure the appliance is positioned on a stable
surface.
» Make sure no foreign body is present inside the milk
frother.
» Make sure there are no foreign bodies between
the base and the milk frother that prevent proper
operation.
Cold beverage preparation
failed.
» Multifunction button operated
incorrectly.
» Milk frother damaged.
» Make sure to press and holed pressed the
multifunction button for 3 seconds.
» Contact Lavazza’s Customer Service.
Summary of Contents for Jolie & Milk
Page 171: ......