Technical support maintenance manual
Rel. 0.00 / February 2020
41
Attention
During re-assembly, do not
force the ejector back into its
housing, but rather insert it in
the indicated hole, following its
particular shape.
6
7
Figure F
: with the capsule loading
lever half-lowered, pull the slide
(
6
) outward and lift it.
Extract the capsule frame (
7
).
Figure G
: unscrew the four screws
on the left-hand slide.
A
Extract the slide.
Attention
During re-assembly, ensure the lateral slides are properly re-inserted into the Unit (one is marked by the let-
ter “L” - left, and the other by the letter “R”, right).
E
F
G
