Technical support maintenance manual
Rel. 0.00 / February 2020
25
Figure C
: disconnect this type of
wiring by separating the male con-
nector from the female by pulling
it outwards.
10.2. REMOVAL OF HYDRAULIC CONNECTIONS
This paragraph describes all the types of disconnection of the hydraulic pipes on the machine.
Figure A
: remove the type of hy-
draulic pipe shown in the figure by
pulling the pipe outwards to dis-
connect it from the fitting.
Warning
Do not use screwdrivers or oth-
er tools which could damage
the pipes and fittings.
Figure B
: disconnect this type of
hydraulic pipe by removing the
clip (
1
) using long nose pliers and
disconnecting the pipe (
2
) by pull-
ing it outwards.
Note
Hydraulic pipe passages must not be altered. Any clamps must be removed during disassembly and re-
stored during reassembly operations.
C
A
B
1
2
E
