LAVAMAT 86850 Instruction Booklet Download

Page: 22 / 52

Use

Opening the door after the programme has started

First set the machine to pause by pressing the button

●

If the messages

«Paused»

is steady on the display, the door can be opened.

●

the messages

«Paused»

and

«Door locked»

appear alternately on the

display , this means that the machine is already heating, that the water level
is above the bottom edge of the door or that the drum is turning: in this case
the door can not be opened.

●

If you cannot open the door but you need to open it you have to switch the
machine off by turning the selector dial to

. After about some minutes the

door can be opened

(pay attention to the water level and

temperature!)

After closing the door, it is necessary to select the previous programme again
and to press the button

, the machine will resume the programme from the

point where it had been interrupted.

At the end of the programme

The machine stops automatically. The pilot light of the button

goes off, a static

0:00

appears on the display and the acoustic signal sounds for some minutes.

If the RINSE HOLD or NIGHT CYCLE option has been selected, the pilot light of
the button

goes off, the messages

«Door locked»

and

«Rinse hold»

appear

on the display, the door is blocked to indicate that the water must be emptied
out.
Please

follow the below instructions

to empty out the water

●

turn the programme selector dial to

O/OFF

●

select the DRAINING or SPINNING programme and confirm it by pressing
button

●

reduce the spin speed if needed, by means of the relevant button

●

press the button

●

when the programme has finished the display shows a static

0:00

and the

message

«Finished»

. The door can be opened.

Turn the programme selector dial to

O/OFF

to switch the machine off. Remove

the laundry from the drum and carefully check that the drum is empty.

If you do not intend to carry out another wash, close the water tap. Leave the
door open to prevent the formation of mildew and unpleasant smells.

132966571.qxd 21/01/2008 16.14 Pagina 22

Downloaded From WashingMachine-Manual.com Manuals

Summary of Contents for 86850





















































Search results

Summary of Contents for 86850

Reviews:

Related manuals for 86850

Brands by name

Popular brands

LAVAMAT 86850, Instruction Booklet

Search results

Summary of Contents for 86850

Reviews:

Related manuals for 86850

Brands by name

Popular brands