Lava Charge-Check, Advanced Features

Page: 2 / 2

I
n addition to the standard modes, there are several advanced settings available on
Charge-Check.
Display Current Mode
MADE IN
Rev
. A01
2 Vulcan Street
Toronto, ON
Canada, M9W 1L2 Tel: (416) 674-5942
Toll Free (US): 1 (800) 241-LAVA(5282)
Email: sales@lavalink.com
Website: www.lavalink.com/lavasimulcharge
Corporate Website: www.lavalink.com
TM
This setting provides a way of visually verifying the current selected mode without having to recon gure
Charge-Check.
To Display Current Mode you will need to follow these steps:
2 / 2
Advanced Charge-Check Settings
Ensure the Charge-Check is powered on.
Hold down the Black Button on the Charge-Check unit for 10 seconds, until the LEDs begin ashing back and
forth for several seconds, and continue holding the black button.
1.
2.
Once the LEDs stop ashing, the LEDs will then blink to display the current mode (i.e. 2 blinks would indicate 2 hour
timeout mode).
Day/Night Mode
By default, the LEDs will slowly pulse whenever the Charge-Check is charging. Since most users charge their devices
overnight, or beside their beds, this mode makes it possible to disable, or enable, the LEDs during a charge.
To toggle between Day Mode and Night Mode you will need to follow these steps:
Once the LEDs start ashing, they will continue to ash until the black button has been released. This indicates that the
top-up mode has not been modi ed and that the LEDs charging status has been changed.
1. Ensure the Charge-Check is powered on.
2. Press the black button on the Charge-Check unit at least 7 times.
3. Hold down the black button for 10 seconds, until the LEDs begin ashing back and forth for several seconds, and
continue holding the black button.
Restore Factory Defaults
This setting provides a means of restoring the Charge-Check to its original settings (i.e. Day Mode with a 3 hour
timeout).
To Restore Factory Defaults you will need to follow these steps:
Once the LEDs stop ashing, the LEDs will then blink 3 times indicating that the unit has been restored to its default
settings (i.e. Day Mode with a 3 hour timeout).
1. Ensure the Charge-Check is powered o .
2. Press and hold the black button while connecting the Charge-Check unit to power.
3. Continue to hold the black button, until the LEDs begin ashing back and forth for several seconds, and continue
holding the black button.