Cleaning and Maintenance
1. Please unplug the unit before cleaning it.
2. Please clean the water tank every two or three weeks, and clean the flume every week.
3. Please take out the water tank when cleaning it and pull the plastic tube out of the atomizing cup properly, then
take out the atomizing cup and clean them.
4. Use a dry cloth to absorb water remaining when cleaning the atomizing cup and dry it using a piece of soft cloth.
Or use mild detergent to clean the atomizing cup if it is dirty.
5. Please add a few drops of lubricant to the motor shaft after cleaning to extend motor life every year.
6. Pack this appliance properly and store it in a cool dry place if you are not using it for a period of time.
Frequently Asked Questions
If your fan is not working properly, please check the followings (1-4 for mist function) before sending to service agent:
Questions
Answers
Solution(s)
1. Why is there no mist and no wind
from fan?
a. Power cord plug is not connected
properly and electric power is off. b.
MIST switch is off.
a. Ensure that the power cord plug is
fully inserted into the electrical outlet
and turn on the electric power. b. Turn
on the MIST switch.
2. The ultrasonic transducer is working
properly but how come there is no mist
spray?
a. Water tank is broken or with crack, so
flume is full of water. b. Fan is not
working.
a. Pour out the water from flume,
change a new water tank. b. Change a
new fan motor.
3. Why is there no mist even though fan
is working?
a. No water or water level is not
enough. b. Bobber doesn’t float in the
water. c. Ultrasonic transducer surface
was filled up. d. Clamp plate of water
level switch is not firmly positioned in
place. e. Ultrasonic transducer is
damaged.
a. Add water. b. Pull out the bobber
and let it float out. c. Clean ultrasonic
transducer with detergent supplied
together with product. d. Reinstall clamp
plate of water level switch. e. Change
the ultrasonic transducer.
4. Why is there a peculiar smell of mist? a. Peculiar smell of new product will
disappear after a period of using. b.
Dirty water or water storage time is too
long.
a. Take out the tank and open tank
cover, and put it to a ventilated and dry
place. b. Clean water tank and flume
and change the clean water.
5. Why is the fan not operating?
a. The plug inserted may be lacking
electricity or fuses may have gone off.
a. Make sure the plug works and check
your fuses.
6.Heavy unit vibration.
a. The rear guard is not installed
tightly. b. The blade cap is loosened. c.
The blade is damaged. d. The blade is
not aligned
a. Install the rear guard tightly. b.
Tighten the blade cap. c. Change a new
fan blade. d. Turn the fan blade 180°
and then reinstall blade.
7. Other unusual problem.
a. Motor appeared smoke or a smell of
burnt. b. Exposed metal parts with
electric or the fan insulation is
damaged. c. The rear cover of motor is
damaged.
a.b.c. Stop using and send to service
agent for repair.
LAVA AIRE
I T A L I A
Manufactured for: www.LavaHeat.com
JR ZIONI DESIGNER