lauson CP449, Instruction Manual

Page: 9 / 80

OTHER OPERATION
AUX IN
Via this socket you can also hear the sound of other playback devices such as MP3 players, CD
players etc. through the loudspeakers.
1. Please connect the external device with a 3.5 mm stereo jack plug to the AUX-IN socket.
2. Repeatedly press the STANDBY / FUNC. button, until “AUX” is shown in the display.
3. You will hear the sound playback from the external device through the loudspeakers. You may
adjust the volume with VOL + / VOL -. The CD buttons are not functional.
4. For the remaining procedure, please see the operating instructions of the external sound
source.
Headphone jack
For headphone operation, use headphones with a 3.5 mm jack plug, which you insert into the
PHONES headphone jack. The speakers are turned off.
CLOCK SETTING
1. Press the “STANDBY / FUNC.” button for 3-4 seconds to switch unit at standby mode.
2. Press and hold the “PLAY / PAUSE / CLOCK” button for 3-4 seconds to entry clock set mode.
3. Adjust time format by pressing the “SKIP + / Tun +” or “SKIP - / Tun -” button.
4. Press the “PLAY / PAUSE / CLOCK” button to confirm time format
Notes:
- Because clock setting is at standby mode, the display is dim.
- Clock set will always be “24hr” time format.
- While unit is under operation, press and hold the “PLAY / PAUSE / CLOCK” button for 3-4
seconds to see the time.
STANDBY MODE
- Press the “STANDBY / FUNC.” button for 0.1 second to switch unit to operation.
- Press the “STANDBY / FUNC.” button for 3-4 seconds during operation to switch unit to standby.