LAUREL LAUREATE Series, Owner'S Manual

Page: 20 / 43

20
Option board dependent menu items
ALSEt . - SP1 - d - SP2 - d
Menu items related to alarm setup These will only appear if a relay board is detected. If so,
please see Section 14.
AnSEt . An Lo . An Hi ..
Menu items related to analog output setup . These will only appear if an analog output
board is detected. If so, see Section 15.
SEr 1 . SEr 2 . SEr 3 . SEr 4 . _ Addr
Menu items related to serial communications . These will only appear if an RS232 or
RS485 I/O board is detected. If so, see Section 16.
Menu lockout items
Loc 1 . Loc 2 . Loc 3 . Loc 4 .
Menu items used to enable or lock out (hide) other menu items. Loc menu items may in turn
be locked out by a hardware jumper. Please see Section 10.
* Scaling method 2, “Reading Coordinates of 2 Points Scaling Method,” will appear before all
other Menu items, including _ InPut . Decimal point is set by dEC.Pt .