10
rear panel. Once the rear panel is in place, reinstall the input/output screw clamp terminal
plugs.
PANEL MOUNTING
Slide the meter into the 45 x 92 mm 1/8 DIN panel cutout.
Ensure that the provided gasket is in place between the
front of the panel and the back of the meter bezel.
The meter is secured by two pawls, each held by a screw.
Turning a screw clockwise extends the pawl outward.
Turning the screw clockwise further tightens it against the
panel to secure the meter.
Turning a screw counterclockwise loosens the pawl and
retracts it into its well. This allows the meter to be inserted
into the panel cutout for installation, or to be removed from
the panel cutout following installation.
Note:
In no case should a screw be removed from its pawl. Doing so would cause the screw
and pawl to fall off and likely get lost.
Dimensioned case drawings
Summary of Contents for LAUREATE Series
Page 27: ...27 SERIAL CONNECTION EXAMPLES...
