![background image](http://html1.mh-extra.com/html/laundry-jet/swift/swift_installation-manual_3851833018.webp)
+1.800.867.4580 [email protected] www.laundryjet.com
18
Jet Pack Installation
5.1
Jet Pack Installation
Jet Pack Installation
▪
Using a stud finder, locate mounting stud
position. Mark Jet Pack installation position
on the intended mount wall.
▪
Draw a vertical line down the center of your
mount stud at the elevation of your cabinet
mount cutout. The line should be long enough
to see in both mount positions.
▪
Move the unit into position until you can see
your mount line in the mount slots.
▪
Mark your mount hole position for predrill at
.25" (6.5mm) Predrill your mount holes to 3"
(76mm)
▪
Using a socket drive on your drill, set the jet
pack into position and install the 4 provided
1/4"x 3" Lag screws.