![background image](http://html1.mh-extra.com/html/laundry-jet/swift/swift_installation-manual_3851833017.webp)
+1.800.867.4580 [email protected] www.laundryjet.com
17
Jet Pack Installation
5.1
Jet Pack Installation
Blower Pod Installation
If possible, install the Blower Pod into the unit after the jet pack has been mounted to the wall. If there
is not sufficient room to install the blower pod first, follow instructions below and then proceed with the
jet pack installation. See page 18 for instructions.
▪
Remove the eight 10-32 screws from the left side of the unit and remove temporary cardboard/particle
board side plate.
▪
Align and position the blower pod between guide rails and slide into the unit until fully seated. Reinstall
the eight 10-32 screws.