![background image](http://html2.mh-extra.com/html/launch/x-431-pro3/x-431-pro3_manual_4779880024.webp)
LAUNCH
18
•
Report
: Tap to save the current data in text format. All reports are saved in
User Info -> My
Report -> Health Reports
.
Notes:
1. Diagnostic report is classified into two categories: Pre-Repair report and Post-Repair report. To facilitate
the comparison of the pre-repair and post-repair reports and get accurate test result, please make sure you
saved the right type of the diagnostic report.
2. By default, the workshop information is blank. You can configure and revise it from User Info ->
Settings -> Shop Information. After you configured the information, it will be automatically generated
every time the diagnostic report is saved. All vehicle and workshop information will be appended as a
tag on the diagnostic report, which allows you to easily retrieve the desired report while performing the
Filter function of Diagnostic Report.
•
Compare Results
: Tap to select the pre-repair report to compare. By comparison of the pre- and
post- repair reports, you can easily identify which DTCs are cleared and which remain unfixed.
Note: Before performing this function, please make sure that: 1) You have saved a pre-repair report of the
currently tested vehicle; and 2) You have already made some repairs and service and cleared the DTCs after
the pre-repair reported is generated. Otherwise, no differences exist between the pre- and post- repair
reports.
•
Diagnostic Plan
: Figures out the diagnostic plan and repair solutions for the detected DTCs.
•
Clear DTCs
: Tap to clear the existing diagnostic trouble codes.
Note: Clearing DTCs does not fix the problem(s) that caused the code(s) to be set. If proper repairs to
correct the problem that caused the code(s) to be set are not made, the code(s) will appear again and the
check engine light will illuminate as soon as the problem that cause the DTC to set manifests itself.